Instruction manual

CanopyInstallationandOperationManual
Home Appliances – November 2012
15
LCD Touch control
Pic 8
1. Power on: Switch on the power supply, and the backlight is lit, displaying “24-
hour system”. The output is then blocked up,and the soot machine enters
standby status. The backlight disappear automatically 30 seconds later under
the condition of none operation.
2. Press “Indicator” key: Press the indicator key once, the indicator is lit, and
on
the LCD screen is lit. Press it for a second time,
of the indicator and the LCD
screen will distinguish and it will be repeated again and again.
3. Power on position and increase key
, the motor is provided with three positions,
i.e. low, medium and high.
1. Press
key once, the is displayed on the display screen, and the motor
starts operation. The
is the low position (power on position.)
2. Press
key once more at the low position, the is displayed on the
display screen, and the
is the medium position.
3. Press
key once more at the medium position, the is displayed on
the display screen, and the
is the high position.
4. Go on pressing
key at the high position, the is still displayed on
the display screen, and the motor works normally. It is still at high position at
this time.
4. Power on position and decrease key “
”
1. Press “
” key once, the motor is adjusted to a lower position, and the LCD
screen displays that position in the meantime; If it is decreased continuously
to none position, then, it is the power off position (namely, the motor stops
operation.)
5. Timer key “
”:
1. The timer key is the timer setting key if the timer key doesn’t work at both the
position and indicator.
 Long press timer key
for 2-3 seconds, time segment , and the
first two hour bit segment flash, use key for the digit increase, and use
key for the digit decrease. Namely: The variable is 01 each time it is
pressed; the hour segment is with the largest digit of 23. If it exceeds 23,