Instruction manual

CanopyInstallationandOperationManual
Home Appliances – November 2012
13
LCD Electronic button
Pic 7
1. Plug the hood; LCD will display 24-hour system with blue backlight. Backlight will
be extinguished after 30 seconds without any operation.
2. Press “
” button once; lights will be on and LCD will show “ ”. Press “ ”
button again; lights will be off and “
” on LCD will disappear.
3. Press “
” button once; the hood works at LOW speed and LCD will show “ ”
and “
” button will be on. Press “ ” button again; the hood works at MEDIUM
speed. Press “
” button one more time; the hood works at HIGH speed. Press
“
” button again; the hood works at LOW speed again and it repeat. While
pressing “
” button; the “ ” button is always on. If you want to stop the hood
now; press the “
” button once.
4. When the hood is not working; press “
” button once. The hood will work at the
speed it works last time and LCD will show “
”. Press “ ” button again; the
hood stop working and “
” will disappear from LCD.
5. When both “
” button and “ ” button don’t work; “ ” button is used for
time-setting. Press “
” button for 2 to 3 seconds; will be shown on LCD
and
flashes; which represents hour. Press “ ” button once the number adds
by 01. Continue pressing “
” button; it will display from 13;14… until 23. When
LCD shows 23; it doesn’t work by pressing “
” button. Press “ ” button once;
the number reduces by 01. When LCD shows 00; it doesn’t work by pressing “
”
button. After setting hour; you can start setting minute by pressing “ ” button
again.
on LCD flashes; which represents minutes. Press “ ” button once the
number adds by 01. Continue pressing “
” button; it will display from 01;02…
until 59. When LCD shows 59; it doesn’t work by pressing “
” button. Press “ ”