User`s manual

Front Panel Operation
5-7
3 Press t or s to scroll through the available
SCSI drives.
Adding New Drives into Current List
1 Press ENT for two seconds for the Main Menu.
2 Press t or s to select Scan new SCSI Drive
and press ENT.
Scan new SCSI
Drive ..
3 Press t or s to select channel and press ENT.
Scan Channel=1
..
4 Press t or s to select the ID number and press ENT
for two seconds.
Scan Channel=1
ID=0 ?
5 Repeat step 2 to 5 for all the new drives to be
included.
Issuing a Reset
1 Press ENT for two seconds for the Main Menu.
2 Press t or s to select Reset This Controller and press
ENT.
Reset This
Controller ..
3 Press ENT for two seconds to confirm reset. Confirm Reset
This controller?
Serial Number
1 Press ENT for two seconds for the Main Menu.
2 Press t or s to select Serial Number and press
ENT.
Serial Number:
XXXXXXXX
The serial number of the unit will be displayed on the LCD panel.
Download Firmware
1 Press ENT for two seconds for the Main Menu.
2 Press t or s to select Download Firmware
and press ENT.
Download
Firmware
3 Press ENT for two seconds to confirm download
firmware.
Confirm
Down load?
4 The controller will display message and await a
response from the host.
Download
in Progress..