Installation guide

Logical Hardware Configuration
HP-UX version 11.00.03 Administering Fault Tolerant Hardware 5-19
Figure 5-4 shows a system with a StorageWorks disk enclosure, dual-initiated
SCSI buses (14/0/0 and 14/0/1), 16 disk drives on those buses (the disks are
labeled 0/0 through 1/7; the first number specifies the SCSI bus [0 or 1] and the
second number specifies the SCSI ID [0 through 7]), and the single-initiated SCSI
buses (14/0/2 and 14/0/3).
Figure 5-4. SCSI Device Paths with StorageWorks Disk Enclosures
Main System Bus
Card-Cage 2
14/0/0
U501Card
SCSI
0
SCSI
1
SCSI
2
Card-Cage 3
U501 Card
SCSI
2
SCSI
1
SCSI
0
14/0/2
14/0/3
Slot
736
2
5
14
0
0 0 0 0 0 0 0 0
1 1 1 1 1 1 1 1
14/0/1