Installation guide

Logical Hardware Configuration
5-12 Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
Logical LAN Manager Configuration
The logical LAN manager subsystem addressing convention is as follows:
The first-level address, 13, is the logical LAN manager nexus (LNM).
The second-level address is a constant, 0.
The third-level address identifies a specific adapter (port).
Figure 5-5 illustrates a sample configuration for a system with three logical
Ethernet (LAN) ports.
Figure 5-5. Logical LAN Configuration
The following sample ftsmaint ls output shows the hardware paths for a
system with three logical Ethernet ports:
Modelx H/W Path Description State Serial# PRev Status FCode Fct
===========================================================================
- 13 LNM Nexus CLAIM - - Online - 0
- 13/0/0 LAN Adapter CLAIM - 0 Online - 0
- 13/0/1 LAN Adapter CLAIM - 0 Online - 0
- 13/0/2 LAN Adapter CLAIM - 0 Online - 0
See the HP-UX Operating System: LAN Configuration Guide (R1011H) for more
information about logical LAN manager addressing.
Main System Bus
transparent
0
LAN
0
LAN
1
LAN
2
13/0/0
13/0/1
13/0/2
GBUS
11
12
14
RECCBUS
0
1
LPKIO
CAB
LSM
LMERC
15
13
LNM