Installation guide

Product Documentation
xviii Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
Related Documentation
In addition to the operating system manuals, the following documentation
contains information related to administering a Continuum system running the
HP-UX operating system:
■ The Continuum Series 400 and 400-CO: Site Planning Guide (R454) provides a
system overview, site requirements (for example, electrical and environmental
requirements), cabling and connection information, equipment specification
sheets, and site layout models that can assist in your site preparation for a
Continuum Series 400 or 400-CO system.
■ The HP-UX Operating System: Continuum Series 400 and 400-CO Operation and
Maintenance Guide (R025H) provides detailed descriptions and diagrams,
along with instructions about installing and maintaining the system
components on a Continuum Series 400 or 400-CO system.
■ The D859 CD-ROM Drive: Installation and Operation Guide (R720) describes
how to install, operate, and maintain CD-ROM drives on a Continuum Series
400 or 400-CO system.
■ The Continuum Series 400 and 400-CO: Tape Drive Operation Guide (R719)
describes how to operate and maintain tape drives on a Continuum Series 400
or 400-CO system.
■ Each PCI card installation guide describes how to install that PCI card into a
Continuum Series 400 or 400-CO system.
■ The sam(1M) man page provides information about using the System
Administration Manager (SAM).
■ For information about manuals available from Hewlett-Packard™, see the
Hewlett-Packard documentation web site at http://www.docs.hp.com.