Installation guide

Index
HP-UX version 11.00.03 Index 3
FRU, 1-6, 5-1
ftsmaint command
burning PROM code
console controller
, B-5
CPU/memory board, B-3
online, offline, diag partitions
, B-5
path partition, 3-5
SCSI adapter card, B-7
changing MTBF fault limit
, 5-31
determining hardware paths with, 5-3
displaying MTBF statistics, 5-30
enabling hardware
, 5-28
G
grace period, power failure, 3-30
guidelines for maintaining system
, 2-5
H
hard errors, 5-27
hardware architecture
, 1-6
hardware component status, 5-22
hardware components
see components
hardware configuration
, 5-5
hardware paths
CPU/memory board
logical
, 5-22
physical, 5-7
definition of
, 5-2
logical addresses, 5-9
logical cabinet addresses, 5-10
physical addresses
, 5-3
hardware status
, 5-25
help console command, 3-18
history console command
, 3-19
hot pluggable components
, 1-6
hpmc_cpu console command, 3-19
HUB system
, 6-1
I
I/O adapter cards
downloading firmware
, B-10
I/O channel separation
, 4-2, 4-8
I/O subsystem addresses
adapter or bridge
, 5-8
device-specific service
, 5-8
I/O subsystem nexus (PCI, HSC, or
PKIO), 5-8
main system bus nexus (GBUS)
, 5-8
SLOT interface, 5-8
incoming RSN file, 6-13
initlevel boot parameter
, 3-14
installing
hardware, 2-2
software
, 2-2
instance number, 5-17
integrity, best data, 4-3
internal disks
, 1-4
ioscan command, 5-3
islprompt, 3-14
K
kernel
booting alternate, 3-13
kernel boot parameter
, 3-14
L
lconf command, 5-15
lconf command
, 5-15
LIF commands, using, 3-32
lifcp command, A-2
lifinit command
, A-2
lifls command, A-2
lifrename command, A-2
lifrm command
, A-2
list_rsn_cfg command
, 6-8, 6-11
list_rsn_req command, 6-9, 6-11
lock-step
, 1-6
logging events
, 6-1
logical addresses, 5-9
mapping to device files
, 5-20
for disk and CD-ROM devices
, 5-20
for flash cards
, 5-21
for tape devices
, 5-20
mapping to physical devices
, 5-18
logical cabinet addresses
, 5-10
logical cabinet-component addresses
individual cabinet components
, 5-10
logical cabinet nexus (CAB)
, 5-10
specific cabinet number
, 5-10