Installation guide

Updating PROM Code
B-2 Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
Table B-1. PROM Code File Naming Conventions
PROM Code File Type Naming Convention
CPU/memory GNMNSccVV.V.xxx
GNMM or GNMN is the modelx number, G2X2 for
PA-8500 and PA-8600.
S is the submodel compatibility number (0–9).
cc is the source code identifier: fw is firmware.
VV is the major revision number (0–99).
V is the minor revision number (0–9).
xxx is the file type (raw or bin).
For example:
G2X20fw7.0.bin
console controller
EMMMMSccVV.Vrom.xxx
EMMMM is the board identification number
S is the submodel compatibility number (0–9).
cc is the source code identifier: on (online), of
(offline), or dg (diagnostic).
VV is the major revision number (0–99).
V is the minor revision number (0–9).
rom specifies read-only memory.
xxx is the file type (raw or bin).
For example:
E5940on21.0bin (online)
E5940of21.0bin (offline)
E5940dg21.0bin (diagnostic)
SCSI adapter uMMMMccVVVVxxx
uMMMM is the card identification number.
cc is the source code identifier: fw is for firmware.
VVVV is the revision number.
xxx is the file type (raw or bin).
For example:
u5010fw0st5raw (for a U501 adapter)