Installation guide

Remote STREAMS Environment
7-12 Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
Read Krib, PMCB = 0x287b0
Proc Table Starts at 0x2d000
Proc table for rpq_wdog.rel starts at 0x2d334
Code Base for rpq_wdog.rel starts at 0x10b4000
+ [ 0 -ne 0 ]
+ echo /sbin/tomcat/tfinal_init -p 0/3/6/0
/sbin/tomcat/tfinal_init -p 0/3/6/0
+ /sbin/tomcat/tfinal_init -p 0/3/6/0
+ [ 0 -ne 0 ]
+ echo /sbin/tomcat/tfinal_init -p 0/3/4/0
/sbin/tomcat/tfinal_init -p 0/3/4/0
+ /sbin/tomcat/tfinal_init -p 0/3/4/0
+ [ 0 -ne 0 ]
+ [ 0 -ne 0 ]
Tue Nov 14 02:27:14 2000
Child exited with exit status 0 for pid no 697
8. If the new personality has downloaded successfully (as indicated in bold in the
above sample output), skip to step 10. If the new personality fails to download,
an error message is generated.
9. Display the firmware message by entering the following command:
rpqprntf card# -cs
The rpqprntf command reads the error message(s) from the <card>
firmware, and displays a message describing the error. Make any corrections
needed, as indicated by the message, then proceed to the next step.
10. Re-enable the card to ensure it uses the correct personality by entering the
following command:
ftsmaint disable hw_path;ftsmaint enable hw_path