Installation guide

Remote STREAMS Environment
HP-UX version 11.00.03 Remote STREAMS Environment 7-11
Process ID = 0x05010003
[Info] Loading card 12 /sbin/tomcat/rpq_gdb.rel -O -D3 ...
/etc/lucent/rpq_ll.card14.out created successfully
/etc/lucent/rpq_ll.rel successfully loaded on card 14
Process ID = 0x05010003
[Info] Loading card 14 /sbin/tomcat/rpq_gdb.rel -O -D3 ...
/sbin/tomcat/rpq_gdb.card14.out created successfully
/sbin/tomcat/rpq_gdb.rel successfully loaded on card 14
Process Name = rpq_gdb.rel
Process ID = 0x05010004
[Info] Loading card 14 /sbin/tomcat/rpq_wdog.rel -O -D3 ...
/sbin/tomcat/rpq_gdb.card12.out created successfully
/sbin/tomcat/rpq_gdb.rel successfully loaded on card 12
Process Name = rpq_gdb.rel
Process ID = 0x05010004
[Info] Loading card 12 /sbin/tomcat/rpq_wdog.rel -O -D3 ...
/sbin/tomcat/rpq_wdog.card12.out created successfully
/sbin/tomcat/rpq_wdog.rel successfully loaded on card 12
Process Name = rpq_wdog.rel
Process ID = 0x05010005
[Info] Successful loading ...
+ [ 0 -ne 0 ]
+ echo /sbin/tomcat/wdog_init -v -p 0/3/4/0
/sbin/tomcat/wdog_init -v -p 0/3/4/0
+ /sbin/tomcat/wdog_init -v -p 0/3/4/0
/sbin/tomcat/rpq_wdog.card14.out created successfully
/sbin/tomcat/rpq_wdog.rel successfully loaded on card 14
Process Name = rpq_wdog.rel
Process ID = 0x05010005
[Info] Successful loading ...
+ [ 0 -ne 0 ]
+ echo /sbin/tomcat/wdog_init -v -p 0/3/6/0
/sbin/tomcat/wdog_init -v -p 0/3/6/0
+ /sbin/tomcat/wdog_init -v -p 0/3/6/0
/sbin/tomcat/wdog_init/sbin/tomcat/wdog_init:Found p:Found
process rpq_wdog.rocess rpelq_wdog.r at PID el0 at PID x5 on
ca0rx5 on cad 0/3/6/r0d 0/3/4/
0
ROM Version 0x1000001
ROM Table Ptr=0x3304, size = 0x30
Read RosTab->KernelPtr=0x28860
Reading KRIB from 0x28860
Read Krib, PMCB = 0x287b0
Proc Table Starts at 0x2d000
Proc table for rpq_wdog.rel starts at 0x2d334
Code Base for rpq_wdog.rel starts at 0x10b3000
ROM Version 0x1000001
ROM Table Ptr=0x3304, size = 0x30
Read RosTab->KernelPtr=0x28860
Reading KRIB from 0x28860