Installation guide

Remote STREAMS Environment
7-8 Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
Downloading Firmware to a Card
The /sbin/orsericload utility is a top-level wrapper script for downloading
configuration files. It is called by odownloadd with all the arguments taken from
the opersonality.config and odownload.conf files. After the
orsericload utility has finished downloading the files, it calls tfinal_init.
The syntax for the orsericload command is as follows:
orsericload [-r] [-p card_#][-c config] [-x tcxbinfo]
For more information, see the orsericload(1M), odownload.conf(4),
opersonality.conf(4), tcxbinfo(4), and the tfinal_init(1M) man pages.
Setting and Getting Card Properties
The /sbin/ftsftnprop utility uses the opersonality.conf file to set or get
the property of cards. The tcxbinfo field of the opersonality.conf file
contains the maximum value parameters that are to be downloaded to a card. For
more information, see the ftsftnprop(1M) man page.
Table 7-2. orsericload Options and Parameters
Option Description
-r Resets the card before a download.
-p card_# Specifies the card to which the firmware is to be
downloaded. card_# is the logical card number.
-c config Specifies the name of the configuration file, config, that
contains the firmware to download to the card, card_#.
The appropriate configuration file to specify is predefined
in the opersonality.config file.
-x tcxbinfo Specifies the name of the tcxbinfo file that contains the
maximum value parameters to download to the card,
card_#. The default value is
/etc/lucent/tcxbinfo.template.