Installation guide

RSN Files and Directories
HP-UX version 11.00.03 Remote Service Network 6-13
Communication Queues
The /var/stratus/rsn/queues directory contains files and subdirectories
used by RSNCP when it communicates with the HUB. These files include TM files,
LCK files, C. files, D. files and Z. files. Table 6-3 describes the files and
subdirectories located in the /var/stratus/rsn/queues directory.
Table 6-3. Contents of /var/stratus/rsn/queues
File/SubDirectory Subdirectory Files Description
core* Not applicable Core files (if any) from the rsnd
daemon.
HUB/ Z/C.HUB*
D.HUB*
Z.HUB*
Urgent grade messages.
d/C.HUB*
D.HUB*
Z.HUB*
Standard grade messages.
hub_pickup/ Any outgoing file
that was not queued
successfully
Contains RSN files that fail to be
queued. The files are transferred
with priority m, manual pickup.
incoming/ Any incoming file This subdirectory stores all
incoming files.
locks/ LCK..HUB.d Lock file indicating the HUB and
job grade that rsntrans is
currently using. The lock file
contains the pid and process name.
LCK..rsnd Lock file for the rsnd process.
When a second rsnd process
starts, it checks for this file. If this
file exists, the second process exits.
LCK..ttyd2p0 Lock file indicating the
/dev/ttyd2p0 port held by
rsngetty or rsntrans. The lock
file contains the pid and process
name. The lock prevents these
processes from using the port
while it is already in use.