Installation guide

RSN Files and Directories
6-12 Fault Tolerant System Administration (R1004H) HP-UX version 11.00.03
RSN Files and Directories
The following sections provide information on files and directories necessary to
configure the RSN software.
Output and Status Files
The /etc/stratus/rsn directory contains various output and status files.
Table 6-2 describes the files located in the /etc/stratus/rsn directory.
Table 6-2. Files in the /etc/stratus/rsn Directory
File Name Description
hw_status_a
hw_status_b
These files contain redundant binary copies of the
hardware status from the last time the rsnd daemon ran.
rsn.out* These files contain previous output from the rsnd
daemon.
rsn_config This file contains RSN configuration information for the
current system.
rsn_hub_data_a
rsn_hub_data_b
These files contain redundant copies of information
needed when contacting the HUB. If the rsndb is
corrupted, the data stored here will be used to rebuild it.
rsn_msg_queues This file contains message-queue IDs for the database
message queues.
rsndb This file contains RSN configuration database
information.