User guide

Power Supply LEDs

The SANbloc Series power supply provides power factor

correction, over current and over voltage protection. The

power supply also has 853W peak power and AC voltage

brown out protection.

The SANbloc Series power supply has two LED indicators

on it, which are visible from the rear of the enclosure. The

green Power OK LED is on when the power supply is

operating normally. This green LED is driven by the power

supply, and indicates that the power supply output voltages

are operating normally. The power supply amber Fault LED

is driven by the LS Module and power supply. This amber

LED is ON when the LS Module detects a power supply

fault, or it will flash, when the power supply Locate feature

is selected.

Note: The audible alarm will sound when an error is detected

Figure 4-3Power Supply LEDs

Fault LED

Power OK