User guide

Cabling RAID Configurations
42
Figure 3-7 Connecting single RAID enclosure to host
See Appendix C for Loop Diagram or click here to view.
To expand this system it is possible to daisy chain this
enclosure to a JBOD enclosure. This is done by connecting a
link cable between the HSSDC connector on the RAID
enclosure to the HSSDC connector of the expansion
enclosure. To achieve dual loop operation connect a second
link cable from the HSSDC connector on the I/O module of
the RAID enclosure to the HSSDC connector of the second I/
O module on the expansion enclosure (see Figure 3-8).
1
2
1
2
0
I
0
I
To HBA
DB9 Connector