User guide

JBOD Configurations

Single I/O Module to

Host Configuration

This section describes the procedure for connecting enclo-

sures with one I/O module (Copper HSSDC or Optical) to

your host computer, and also how to daisy chain these enclo-

sures together. Having a single I/O module provides single

Fibre Channel loop operation.

To connect the single I/O module enclosure to the host:

1 Insert the HSSDC/Optical connector on the cable, into the

connector on the enclosure (see Figure 3-2).

2 Insert the other end of the cable into the connector on your HBA.

Note: For details on your host and/or HBA refer to the documen-

tation that was supplied with the Host / HBA.

Figure 3-2 Connecting single I/O module to a host

See Appendix C for Loop Diagram or click here to view.

To daisy chain enclosures together connect the link cable

from the HSSDC/Optical I/O module of the first enclosure to

the HSSDC/Optical I/O module of the next enclosure (see

Figure 3-3).

To HBA