User guide

Installing the System in an Equipment Rack

temperatures. Consideration should therefore be given to

ensure that the room ambient temperature is compatible with

these specifications.

Air Flow To ensure that the internal heat build up is properly dissi-

pated into the room environment, air flow should in no way

be restricted. It is essential that no air vents are blocked, and

that the system is a minimum of one meter from a solid

surface such as a wall or partition. Air flow through the

SANbloc Series is from front to rear.

Mechanical Loading Consideration should be given to the loading of the

equipment rack. To maintain a low centre of gravity (thus

reducing the likelihood of instability) racks should be loaded

(where possible) from the bottom of the equipment rack

upwards. This is recommended to ensure personal safety.

CAUTION: When installing or removing a rack mount enclosure,

remove all disk drives. It is recommended that you work with at

least one other person when installing an enclosure. This is neces-

sary to prevent personal injury and damage to the shelf.