User manual

00056640.DOC, Version 1.0
22/24
Setting solid colors:
When the display shows C, you can select the desired solid color. Please see the following table.
Mode: Value: Function:
C01 Red
C02 Green
C03 Blue
C04 White
C05 Neon green
C06 Magenta
C07 Cyan
C08 White
C09 Dark salmon
C10 Lime green
C11 Sky blue
C12 Medium yellow
C13 Pink
C14 Steel blue
C
C15 Cold white
Setting internal programs:
When the display shows P, you can select the desired internal program. Please see following table.
Mode: Value: Function:
P01
Endless loop in 7 colors,
change every 3 seconds
P02
Endless loop in 7 colors,
fade every 3 seconds
P03
Endless loop in 3 colors,
change every 3 seconds
P04
Endless loop in 3 colors,
fade every 3 seconds
P05
Endless loop in 15 colors,
change every 3 seconds
P
P06
Endless loop in 15 colors,
fade every 3 seconds
DMX-Mode
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 RGBW 48 x 3 W will respond to the controller.
Addressing
Press the Menu-button until the display shows d. You can now set the desired address via the UP or DOWN
buttons. Press Enter to confirm.
Controlling:
After having addressed the LED PAR-64 RGBW 48 x 3 W, you may now start operating it via your lighting
controller.
Note:
It’s necessary to insert the XLR termination plug with 120
 in the last lighting in the link in order to ensure
proper transmission on the DMX data link.
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.