User manual

00105023, Version 1.0
29/36
Control Board
The Control Board offers several features: you can easily set the starting address, run the pre-programmed
program or select a DMX channel mode.
Enter the menu by pressing the MODE-button. Browse through the menu by
pressing UP or DOWN. Press ENTER in order to select the desired menu. You
can change the selection by pressing UP or DOWN. Press ENTER in order to
confirm. You can leave every mode by pressing MODE. The functions provided
are described in the following sections.
Mode Program Description
Addr
3CH
Setting DMX channel mode
DMX address setting
d 001~d 512 3 channels DMX mode
d 001~d 512 4 channels DMX mode
d 001~d 512 8 channels DMX mode
d 001~d 512 21 channels DMX mode
4CH
8CH
21CH
Stat
S01 – S20
Static colors *
Auto
Au-1
Auto programs (Master mode)
Program 1
Program 2
Program 3
Au-2
Au-3
Sound
So-1
Sound controlled mode (Master mode)
Program 1
Program 2
Program 3
So-2
So-3
Speed
SP 1—SP9
Select the desired speed
(increasing)
Sensitivity
Se 1—Se9
Microphone sensitivity
Sound controlled mode (increasing)
Colo
Color presets (Master-Mode)
r000-255 Red (0-100%)
g000-255 Green(0-100%)
b000-255 Blue (0-100%)
U000-255 White (0-100%)
dIMM
dI1-dI9 Master dimming
Stro
ON Activate Bar strobe program
OFF Deactivate Bar strobe program
SILE
OFF
Program continues automatically during periods
without music or bass-beat
ON
Program does not automatically continue during
periods without music or bass-beat
Slave
Slav
Slave
InFr
ON
Control via IR remote
:enable
OFF
Control via IR remote
:disenable
* = Please see 8 Channel mode, channels 3 ~ 6 for color choices.
MODE UP DOWN ENTER