User manual

00056669.DOC, Version 1.3
20/22
Controlling:
A
fter having addressed the LED FE-800 RGBAW DMX, you may now start operating it via your lighting
controller.
Note:
It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX-protocol
Channel 1 – Color settings
Value: Function:
001 – 005 Blackout
006 – 010 Red
011 – 015 Green
016 – 021 Blue
022 – 027 White
028 – 033 Amber
034 – 039 Green + blue
040 – 045 Red + blue
046 – 051 Red + green
052 – 057 Red + white
058 – 063 Red + amber
064 – 069 Green + white
070 – 075 Green + amber
076 – 081 Blue + white
082 – 087 Blue + amber
088 – 093 All LEDs on
094 – 123 Program with one color
124 – 185 Program with two colors
186 – 218 Fast auto programs
219 – 250 Slow auto programs
251 – 255 Sound control
Channel 2 – Speed
Value: Function:
000 - 255
Increasing speed of the Chaser-settings
under channel 1 (094 - 250)
Channel 3 – Strobe
Value: Function:
000 – 009 Off
010 - 254 Strobe effect with increasing speed
255 Sound active strobe-effect
Channel 4 – Rotation
Value: Function:
000 – 004 No rotation
005 – 127 Clockwise rotation, with increasing speed
128 – 133 Stop
134 – 255
Counter-clockwise rotation, with increasing
speed