User manual

70064545X87NXS_V_1_0.DOC

23/23

7. PROBLEM CHART

PROBLEM CAUSE REMEDY

No power. The power unit is not connected. Check the connection cable of the

power unit and any extension-cables.

Cannot memorize Scene. Record-button forgotten. Press the Record-button after setting

the channels.

Cannot edit programs. Program mode locked. Unlock program mode.

Programmed scene/chaser

disappeared.

Selected wrong page. Select correct page via the Page-

button.

Cannot display

scene/chaser.

Wrong fader-setting. Adjust Master-fader to maximum, the

Fade-fader and Speed-fader to the

desired setting.

No signal output. Blackout-mode activated. Switch off blackout by pressing the

Blackout-button.

8. CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no servicable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply: 230 V AC, 50 Hz ~

via 15 V DC, 500 mA power unit included in the delivery

Power consumption: 8 W

Number of control-channels: 48

Sound-control: via Line In RCA-socket (min. 100 mV)

DMX 512-output: 3-pin XLR-connector with polarity selector

Dimensions (LxWxH): 710 x 264 x 90 mm

19" mounting dimensions with 6 u

Weight: 7.5 kg