User manual

26
•
EN
EXAMPLE Refer to the chart below for an RGBW moving head.
Control element Function Fixture channel
1/D Dimmer 12
2/R Red 8
3/G Green 9
4/B Blue 10
5/W White 11
6 Shutter/Strobe 6
7 Movement speed 5
8 Color change 12
9 Color change speed 13
10 - N1
...
14 - N1
15/Pan Horizontal movement 1
16/Tilt Vertical movement 3
Table 6.2 Assignment of DMX channels to the control elements
Caution with spots that have no color mixing, no dimmer channel or no movement. These function channels
are permanently assigned in the console and therefore need to be properly assigned. For example, if a fixture
has no color mixing, channels 2/R, 3/G and 4/B should be set to zero and not be used for other functions.
Otherwise when using color effects you have no satisfying results.
Generally it is recommended to always proceed in the same manner when setting various spots. Consider
which control functions the spots require and work out a fixed scheme. Create a list of the required functions
and sort them according to the standard values of the console and the desired assignments. Record the
respective values of the spots.
EXAMPLE Refer to the chart below.
Control
element
Function TMH-75
11-CH mode
DMH-32
16-CH mode
Z-Par
12-CH mode
ML-56 6-
CH mode
THA-250F
3-CH mode
WF-40 9-
CH mode
TMH FE
15-CH mode
1/D Dimmer 10 5 2 N1 3 6 7
2/R Red N1 9 4 1 N1 1 10
3/G Green N1 10 5 2 N1 2 11
4/B Blue N1 11 6 3 N1 3 12
5/W White N1 12 7 4 N1 4 13
6/A
Color wheel
4 7 8 5 N1 8 14
7/UV Gobo 1 5 13 9 6 N1 N1 N1
8 Gobo red 6 14 10 N1 N1 N1 9
9 Shutter 9 4 3 N1 2 5 6
10
Focus/Zoom
7 8 1 N1 1 N1 N1
11 Prism 8 15 N1 N1 N1 9 N1
12 Effect N1 6 N1 N1 N1 7 8
13 Reset 11 16 12 N1 N1 N1 15
14 Speed 3 3 11 N1 N1 N1 5
15/Pan 1 1 N1 N1 N1 N1 1
16/Tilt 2 2 N1 N1 N1 N1 3
Table 6.3 Setup example for various spotlights
This chart is simply a suggestion for your assignments. It is important to assign all necessary functions. It is helpful
to assign equal or similar functions to the same encoder. This facilitates clarity and quick programming. Identical
functions, such as color mixing, can be controlled simultaneously for various fixture types.