User manual

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).

During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's

notes!

Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device

was not designed for. Damages caused by non-observance are not subject to warranty.

For the installation, you need one Flash-tube U-shape.

During the operation, the lamp reaches temperatures of up to 200° C.

Procedure:

Step 1: Unscrew the fixation screws of the protective shield.

Step 2: Remove the protective shield.

Step 3: Remove the old lamp from the lamp-socket.

Step 4: Insert the new Flash-tube U-shape into the lamp-socket.

Step 5: Replace the protective shield and tighten the screws.

Do not operate this device with opened protective shield!

TECHNICAL SPECIFICATIONS

Power supply: 230 V/50 Hz

Power consumption: 45 W

Dimensions (LxWxH): 250 x 175 x 270 mm

Weight: 3 kg

Fitting lamps: Flash-tube U-shape

No. 85010145

Recommended controllers:

EUROLITE Strobe-Controller CH-1, 1 channel No. 52202210

EUROLITE Strobe-Controller CH-2, 2 channels No. 52202212

EUROLITE Strobe-Controller CH-4, 4 channels No. 52202214

EUROLITE Strobe-Controller 19"-dimensions, 4 channels No. 52202222