User manual

00058934.DOC, Version 1.0
18/25
DEVICE DESCRIPTION
Features
TCL LED spotlight set for easy mobile color creativity!
Complete LED light set consisting of 6 LED spots and a crossbar with an integrated DMX control unit and
mounting hole (36 mm) with fixation screw for installation on a stand • Pivotable and tiltable spotlights • Each
spot can be individually controlled via DMX • DMX512 control via regular DMX controller (occupies max. 20
channels) • 7 or 20 DMX channels selectable for numerous applications • Sound-control via built-in
microphone with sensitivity control • Strobe effect • Auto mode • Internal programs • Master/Slave function •
Addressing and setting via control panel with 4-digit LED display and three operating buttons • Additional
controlling possiblity via the EUROLITE RC-2 remote control (not included in delivery) • Equipped with 6 x 3
W TCL LED • Ultra-light ideally suited for mobile use • Suited for installation on a speaker stand (not
included) • Comes pre-assembled with a practical transport bag • Black lacquered metal version • Ready for
connection with IEC power cord and safety plug
Overview
8
4
3
2
1
5
6
9
10
7
1. DMX In
2. DMX Out
3. Control panel with 4-digit LED display and three operating buttons
4. Mic rophon e
5. Sens itivit y co ntrol
6. Jack for remote control EUROLITE RC-2 (not included in delivery)
7. Mounting hole (36 mm) with fixation screw for stand installation
8. Fuse and power supply
9. Fixation screws for hanging bracket fixation (pivoting range)
10. Fixation screws for spot fixation (tilt angle)
INSTALLATION
Mounting on a stand
For mobile use place the light set on a lighting stand. The diameter of the telescopic tube must be 35 mm.
1. On the stand, the fixation screws of the legs. Pull out the legs until the cross struts stand at a 90° angle
to the legs. Tighten the fixation screws of the legs.
2. Attach the light set via its mounting hole on the control unit to the top end of the stand and fasten the
fixation screw.