User manual

00048513.DOC, Version 1.1
23/26
Control Board
The Control Board offers several features: you can simply set the starting address or run the internal
programs. Browse through the menu by pressing Mode. You can change the selection by pressing Up or
Down. The functions provided are described in the following sections.
Setting the DMX Start Address:
Mode: Value:
A
dd
1 - 512
Setting DMX Mode
Mode: Value:
6ch (default setting)
4ch
Setting solid colors:
When the display shows C, you can select the desired solid color. Please see the following table.
Mode: Value: Function:
C01 Red
C02 Green
C03 Blue
C04 Amber
C05 Neon green
C06 Magenta
C07 Cyan
C08 White
C09 Dark salmon
C10 Lime green
C11 Light lavender
C12 Medium yellow
C13 Pink
C14 Steel blue
C
C15 Warm white
Setting internal programs:
When the display shows P, you can select the desired internal program, with or without sound control.
Please see following table.
Mode: Value: Function:
P01
Endless loop in 7 colors,
change every 3 seconds
P02
Endless loop in 7 colors,
fade every 3 seconds
P03
Endless loop in 3 colors,
change every 3 seconds
P04
Endless loop in 3 colors,
fade every 3 seconds
P05
Endless loop in 7 colors,
via sound control
P06
Endless loop in 3 colors,
via sound control
P07
Endless loop in 15 colors,
change every 3 seconds
P08
Endless loop in 15 colors,
fade every 3 seconds
P
P09
Endless loop in 15 colors,
via sound control
You can do without a controller as the device features a built-in microphone, which provides automatic sound
control.
Setting the sound sensitivity:
Mode: Value:
S
S-00 – S-99 (50=default)