User manual

00095856.DOC, Version 1.1
20/24
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
After you connected the EUROLITE LED PST-15W MK2 COB Floor DMX Spot/Wash to the mains, the
device starts running.
The LED display lights up and you can now choose the desired settings via the buttons MODE, ENTER, UP
and DOWN.
- DMX mode
- Channel selection mode
- Standalone mode
- Sound mode
- Dimmer setup
Menu
Hauptmenü
Untermenü
Funktion
DMX mode 001 – 512 DMX address setting
Channel 4/6/7 DMX channel setting
Slave mode No function
Static
1. Static
Static colors RGBW
Strobe speed
2. Change
15 colors change w/ increasing speed
Strobe speed
3. Chang4
Color change RGBW w/. incr. speed
Strobe speed
4. Fade
15 colors fade w/
increasing
s
peed
Strobe speed
Sound Sens: 01 – 31
Sensitivity for audio mode
IR. Remote ON/OFF IR remote On/Off
Fixture ID Password: 050
Dimmer 01/02
Interne Programme
Werte
Effekt
1. Static
R00 – 99 R: 0 – 100%
G00 – 99 G: 0 – 100%
B00 – 99 B: 0 – 100%
W00 – 99 W: 0 – 100%
F00 – 99 Strobe (1 Hz – 20 Hz)
2. Change
Sp01 – 99 15 colors change
F00 - 99 Strobe speed
3. Chang4
Sp01 – 99 4 colors change
F00 - 99 Strobe speed
4. Fade
Sp01 – 99 15 colorsfade
F00 – 99 Strobe speed