Instructions

00125967, Version 1.0
24/32
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Mode
Display
Function
DMX mode
Addr
9CH d001-512
9-channel mode and start address
6CH
d001-512 6-channel mode and start address
5CH
d001-512 5-channel mode and start address
4CH
d001-512 4-channel mode and start address
3CH
d001-512 3-channel mode and start address
Preset colors
Stat S 01-18 Constant lighting in one of 18 colors
Automatic mode
Auto Au 1 – Au 5
Program 1 – 5
Sound control
Soun So 1 – So 5 Program 1 – 5
Running speed in
automatic mode and
sound control
SPEE SP 1-9
Program running speed
slow > fast
Microphone sensitivity
for sound control
SEnS SE 1-9
Microphone sensitivity
low > high
Individual color mix
Colo
r000-255 Red 0-100%
g000-255 Green 0-100%
b000-255 Blue 0-100%
U000-255 White 0-100%
Dimmer
diMM dI 1-dI 9
Total brightness (Stat, Auto, Soun,
and Colo modes)
dark > bright
Sound control silent
scene
SILE
on
LEDs off if there is no music signal
oFF LEDs remain on if there is no music signal
Slave mode
SLAU SLAU Slave mode
IR remote control
InFr
on IR remote control on
oFF IR remote control off
Stand-alone mode
Automatic mode
In automatic mode, 5 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.