User manual

00076701.DOC, Version 1.1

20/23

OPERATION

After you connected the EUROLITE LED SLS-144 RGBW Floor to the mains, the device starts running.

The LED display lights up and you can now choose the desired settings via the buttons MODE/ESC,

ENTER, UP and DOWN.

The device has two operating modes. It can be operated in stand-alone mode via the control board or the IR-

4 remote control or in DMX-controlled mode via any standard DMX controller.

Control board

The control board offers several features, i.e. setting the DMX starting

address, running a preset program or selecting a DMX channel mode.

Browse through the menu by pressing MODE/ESC. You can change the

selection by pressing UP or DOWN. Press ENTER in order to confirm.

You can leave every mode by pressing MODE/ESC. The functions

provided are listed in the following sections.

- STAND ALONE MODE

- Setting Solid Colors

- Auto Mode

- Sound Control / Sensitivity

- DMX MODE

- 4CH or 6CH selection

Setting Solid colors

Press the MODE/ESC button on select the solid color mode, when display shows “

C-

“, you can select the

desired solid color via the UP or Down buttons (see following graphic).

Mod

alue

Fun

tion:

C 1 Red

C 2 Green

C 3 Blue

C 4 White

C 5 Medium yellow

C 6 Rose pink

C 7 Steel blue

C 8 Frost white

C 9 Dark pink

C 10 Light green

C 11 Dark blue

C 12 Light orange

C 13 Pink carnation

C 14 Blue mist

C 15 Pure white