User manual

00076701.DOC, Version 1.1
17/23
DESCRIPTION OF THE DEVICE
Features
Slimline LED spot with 144 x 5 mm LED
• Flat housing form requires minimal space when rigging
• Second mounting bracket for safe standing installation
• Additional rubber feet when the spot shall be positioned on the floor without mounting bracket
• Comfortable addressing and setting via control panel with LED display
• Functions: Static colors, RGBW color blend, internal programs, dimmer, strobe, sound-control
• Operable in stand-alone mode or via DMX
• Master/Slave for parallel operation of several devices
• DMX512 control via regular DMX-controller
• 4 or 6 DMX channels selectable for numerous applications
• Sound-control via built-in microphone
• Microphone-sensitivity adjustable
• Optional remote-control 51915279 EUROLITE IR-4 Remote Control
• Ready for connection with power cord and safety plug
• Feed-through output allows to power another device
• After every 8 devices the fixtures must have a renewed connection with the power mains
INSTALLATION
The device can be installed on the ground or on the wall or ceiling.
Overhead rigging
DANGER TO LIFE!
Please consider the valid standards and national regulation during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily injury and or
damage to property.