User manual

00066216, Version 1.3
20/23
OPERATION
After you connected the spot to the mains, the EUROLITE LED PAR-64 RGB Floor/Short starts running.
The LED display lights up and you can choose the desired settings.
This unit has two operating modes: it can be run as a stand-alone unit without external control via LED
display with operating buttons or alternately in DMX-controlled mode via lighting controller.
Control Board
The Control Board offers several features: you can run the internal programs or set the starting address.
Browse through the menu by pressing the Mode button. Press the Enter button in order to select the desired
submenu. You can change the selection by pressing the Up or Down buttons. Press Enter in order to confirm
your selection. You can leave every mode by pressing Mode. The functions provided are described in the
following sections.
- STAND ALONE-MODE
• Setting Solid Colors
• Internal Programs, Sound Control
- DMX MODE
STAND ALONE-MODE
In Stand Alone Mode, the LED PAR-64 RGB Floor/Short can be used without a controller.
Disconnect the LED PAR-64 RGB Floor/Short from the controller.
Setting Solid Colors
Press the MODE button to select the solid color mode. When the display shows C, you can select the
desired solid color via the UP or DOWN buttons (see following graphic).
Mode:
Value:
Function:
C
C01 Red
C02 Green
C03 Blue
C04 Cyan
C05 Purple
C06 Yellow
C07 White
Internal Programs, Sound Control
Press the MODE button to select the internal program mode. When the display shows P, you can select the
desired internal program, with or without sound control, via the UP or DOWN buttons (see following graphic).
Mode:
Value:
Function:
P
P1
Endless loop in 7 colors,
change every 3 seconds
P2
Endless loop in 7 colors,
fade every 3 seconds
P3
Endless loop in 3 colors,
change every 3 seconds
P4
Endless loop in 3 colors,
fade every 3 seconds
P5
Endless loop in 7 colors,
via sound control
P6
Endless loop in 3 colors,
via sound control