User manual

www.eurolite.de
33
7
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The light
set may be controlled via IR remote control, foot switch or a DMX controller. The operating modes can be
selected by means of the display and the control buttons.
► Operating Buttons
MENU
Selects the operating mode or returns to the initial screen.
ENTER
Activates a value to be modified or saves a value when modifying.
UP
Selects the next menu item or increases values when modifying.
DOWN
Selects the previous menu item or decreases values when modifying.
► Menu Structure
Operating Mode Programming Levels Function
Aut Automatic Mode
Derbies and Spots
AutP
AP01
—
AP18
Show program 1-18
S.01
—
S.99
Running speed slow → fast
M.00
—
M.99
Rotation (Derbies) slow → fast
Laser
AutL
A
L
01
—
A
L06
Show program 1-6
S.01
—
S.99
Running speed slow → fast
M.00
—
M.99
Rotation slow → fast
Strobe LEDs
AutF
A
F
01
—
A
F10
Show program 1-10
S.01
—
S.99
Running speed slow → fast
Derbies, Spots,
Laser and
Strobe LEDs
AutM
AM01—AM03
Show program 1-3
S.01 — S.99
Running speed slow → fast
Sou Sound Control
Derbies and Spots
SouP
S
P01
—
S
P18
Show program 1-18
Laser
SouL
SL
01
—
SL06
Show program 1-6
Strobe LEDs
SouF
SF
01
—
SF10
Show program 1-10
Derbies, Spots,
Laser and Strobe LEDs
SouM SM01 — SM03
Show program 1-3
Col Color Mode
Derbies, Spots and
Strobe LEDs
CoLo
R.000
—
R.255
Red 0-255
G.000
—
G.255
Green 0-255
B.000
—
B.255
Blue 0-255
S.00
—
S.99
Strobe effect slow → fast
dПH DMX Mode
Start Address
d001
—
d***
Start address
Channel Mode
03CH
3 channels
05CH
5 channels
09CH
9 channels
27CH
27 channels
SLA Master/Slave Mode
Mode
SLAV
Slave mode
Notes: (1) Approx. 30 seconds after pressing the last button, the setting menu is automatically exited.
(2) SLAV or d*** modes: If no control signals are available, the display will be flashing.
(3) While menu Menüs AutP, AutL, AutF, AutM, SouP, SouL, SouF or SouM is selected, all LEDs and the
laser are switched off; in the sub menus they will be switched on again.