User manual

www.eurolite.de
28
5
INSTALLATION
Overhead Rigging
This product is designed for overhead rigging to a wall or ceiling with the mounting brackets. If necessary, it
can also be fastened to a truss using appropriate clamps.
To align the unit, release the fixation screws at the mounting brackets, adjust the desired inclanation angle
and retighten the fixation screws. Make sure not to point the laser beams at highly reflective surfaces such
as mirror balls, windows and shiny objects. As a precaution, remove or cover up highly reflective objects in
order to avoid laser reflections.
Mounting clamp Mounting clamp
Fixation screws
CAUTION!
The use of controls, adjustments, or performance of procedures other than what is
specified herein may result in hazardous radiation exposure.
DANGER LASER RADIATION!
Always set up and install the unit so that a minimum distance of 1 m is kept between the laser
light and the audience.