User manual

00081333.DOC, Version 1.0 13/13

The device must only be connected with an electric installation carried out in compliance with the IEC

standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum

fault current of 30 mA.

Please note: A maximum of 10 devices may be linked together. After every 10 devices, the fixtures must

have a renewed connection with the power mains.

OPERATION

After you connected the device to the mains, the UV-tube lamp needs 3-4 minutes warm-up time until it

reaches full lighting output.

CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Article: 51101442 60 cm 51101444 120 cm

Power supply: 230 V AC, 50 Hz ~ 230 V AC, 50 Hz ~

Power consumption: 12 - 13 W 25 - 28 W

Dimensions (LxWxH): 605 x 25 x 43 mm 1205 x 25 x 43 mm

Weight: 0.25 kg 0.36 kg

Maximum ambient temperature. Ta: 45° C 45° C

Maximum housing temperature TC (steady state): 80° C 80° C

Minimum distance from flammable surfaces: 0.5 m 0.5 m

Minimum distance to lighted object: 0.5 m 0.5 m