User manual

ManualsBrandsEUROLITE ManualsLight EffectsLED PAR spotlight system KLS-200

00054242.DOC, Version 2.1

31/32

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are

only to be carried out by authorized dealers.

8.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:

230 V AC, 50 Hz ~

Power consumption:

55 W

Number of DMX channels: 15

DMX512 connection: 3-pin XLR

Number of LEDs: 432 (144 x red, 144 x green, 144 x blue)

Type of LEDs: 10 mm

TV spigot: D = 28 mm

Beam angle: 25°

Sound-control: via built-in microphone

Maximum ambient temperature T

45° C

Maximum housing temperature T

(steady state):

60° C

Min. distance from flammable surfaces: 0.50 m

Min. distance to lighted object: 0.10 m

Fuse: F 2 A, 250V

Dimensions (LxWxH):

1110 x 55 x 295 mm

Weight:

8 kg

9.1 Accessories

EUROLITE FP-1 Foot pedal Item no. 42109710

EUROLITE STV-40A Lighting stand, alu Item no. 59007001

EUROLITE STV-40-WOT Lighting st.no T-bar Item no. 59007002

EUROLITE STV-40S-WOT Lighting st.no T-bar Item no. 59007004

EUROLITE DMX LED Operator 4 Item no. 70064504

EUROLITE DMX LED Operator IR2DMX + IR RC Item no. 70064512