User manual

00054242.DOC, Version 2.1

23/32

4.2 Operating elements and connections

Microphone for sound-controlled operation

2 Sensitivity control for the microphone

3 Connector for the foot pedal FP-1

4 Fixation screw

LED display

6 Control buttons

• button MENU to call the menu items

• button DOWN to switch between sound control and

automatic mode

• button UP to switch to DMX operation

• buttons UP and DOWN to set the speed in automatic

mode and to set the DMX starting address

7 Jack DMX IN

DMX signal input (3-pin XLR) for connecting a DMX

controller

8 Jack DMX OUT

DMX signal input (3-pin XLR) for connection to the DMX

input of another light effect unit

9 Power input with fuse holder

• Used to plug the supplied power cord in.

• Only replace the fuse when the device is disconnected

from mains. Only use fuses of the same rating and

power. The correct value is specified on the device.

10 LED spot 1 to 4

11 Connection cable for the control unit

12 TV pin for placing on a stand

13 Fixation screw