User manual

00075178.DOC, Version 1.0 22/32
4.2 Operating elements and connections
1 Mounting brackets
2 Microphone for sound-controlled operation
3 Sensitivity control for the microphone
4 LED display and control buttons
• [MENU]: Calls the menu items.
• [
▲] and [▼]: Set the speed in automatic mode
and the DMX starting address.
5 Jack DMX IN
DMX signal input (3-pin XLR) for connecting a DMX
controller.
6 Jack DMX OUT
DMX signal input (3-pin XLR) for connection to the
DMX input of another light effect unit.
7 Connector for the foot pedal FP-1
8 Power input with fuse holder
• Used to plug the supplied power cord in.
• Only replace the fuse when the device is
disconnected from mains. Only use fuses of the
same rating and power. The correct value is
specified on the device.
9 Fastening screws
10 LED spot 1 to 4
11 Connectors for the LED spots
12 TV pin for placing on a stand
13 Fastening screws