User manual

00061340.DOC, Version 3.0
13/16
Overview
(1) Bracket-screws
(
2) Mounting-bracket
(3) Tube
(4) Hole for safety rope
(5) Clip-to-hold clamps
(6) Color filter frame
(7) Silicone mains cable with safety plug
(8) Hole for safety rope for color filter frame
INSTALLATION
Installing/Replacing the lamp
DANGERTOLIFE!
Onlyinstallthelampwiththedeviceswitchedoff!
Unplugfrommainsbefore!
Thelamphastobereplacedwhenitisdamaged
ordeformedduetotheheat!
CAUTION!
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one PAR-56 lamp with up to 300 W.