User manual
00095814, Version 1.0
31/32
CLEANING AND MAINTENANCE
Disconnectfrommainsbeforestartingmaintenanceoperation!
DANGERTOLIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse-holder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 100 - 240 V AC, 50/60 Hz ~
Power consumption: 60 W
DMX control channels: 5/6/7
DMX512 connection: 3-pin XLR
Maximum ambient temperature T
a
: 45° C
Maximum housing temperature T
C
: 60° C
Min.distance from flammable surfaces: 0.50 m
Min.distance to lighted object: 0.10 m
Fuse: T 1 A, 250 V
Type of LEDs: 60 W COB LED
Number of LEDs: 1
Beam angle: 7° - 39°
Dimensions (LxWxH): 334 x 195.3 x 172.7 mm
Weight: 3.6 kg