B2S timo alleato del tuo ferro ACTIVE IRONING BOARD WITH INTEGRATED STEAM BOILER AND PROFESSIONAL IRON INSTRUCTION MANUAL Before using this appliance, please read this instruction manual and keep it for future reference.
SAVE THESE INSTRUCTIONS I M P O R TA N T 2 SAF Dear Customer, We are delighted that you have purchased the Euroflex Smooth Active Ironing Board (B2S). Through proper assembly, use and maintenance the board will provide excellent ironing results for a long time. Before using this ironing system for the first time, please read carefully through the instructions in this manual and store them for future reference.
E T Y I N F O R M AT I O N . • • • This appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Keep the appliance and its cord out of reach of children when it is in operation or cooling down. The symbol 5041 relatives to IEC 60417-1 and warns operators that surfaces are liable to get hot during use! This appliance complies with European Directives regarding “electromagnetic compatibility” and “Electrical product safety”.
SAVE THESE INSTRUCTIONS I M P O R TA N T 4 • • • • • • • • • • • • • • • • • • SAF Do not expose the appliance to water, dampness or heat. Only use indoors, not intended for outdor use. Use a dry or slightly damp cloth to clean this appliance. Use solely manufacturer-recommended accessories or spare parts. The steam released from the appliance is extremely hot. Both appliance and accessory tools may scald. Avoid direct contact.
E T Y I N F O R M AT I O N . 1. When this crossed-out bin symbol appears on a product it means that the product is covered by European Directive 2002/96/EC Disposal of your old appliance 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via specific collection facilities designated by the government or the local authorities. 3. Proper disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
MADE IN Product Overview ITALY 16 2 3 4 B2S 9 MADE IN ITALY UP AIR 5 DOWN 1 7 6 8 B2S 13 15 UP AIR 21 DOWN 20 10 14 11 12 17 PRODUCT OVERVIEW 18 1. Power ON-OFF button 2. Power Indicator Light 3. Low water warning light 4. Steam ready indicator light 5. Function switch: blowing position 6. Function switch: suction position 7. Mode switch: synchro selection 8. Mode switch: continuous selection 9. Power supply socket for detachable cable 10. Steam supply button 11.
Before Use BEFORE USE Before starting the appliance for the first time, always remember that an improper use, assembly or maintenance can be hazardous. Please, carefully read the instructions on page 2,3,4,5. 1 PREPARE YOUR IRONING BOARD POSITIONING When setting up the ironing board please note the following: • Place the ironing board on a flat, even, dry surface, near an earthed power socket • Position the ironing board securely so that nobody can knock it over or get hurt.
Before Use 1 3 2 To assemble the iron rest pad proceed as follows: • Pull out the metal frame from the rear part of integrated steam generator. • Put the rest pad on the metal frame following the instruction on it’s reverse side. • Press the rest pad hard on the metal frame to ensure it is fixed properly. Insert the iron cord support in one of the small holes on each side of the ironing board and hang the iron steam cord.
Before Use PREPARE YOUR IRONING BOARD • Remove the iron from the iron protection cover. • Plug the iron cable into the board steam socket. • Put the iron (soleplate down) on the rest pad. FILL THE TANK WITH WATER • • • • • • • Ensure that the electrical cable is disconnected from the power socket. Slide the iron rest pad out horizontally to access the boiler cap. Unscrew and remove the safety boiler cap carefully, ensuring that no steam is present. Fill the bottle with ordinary tap water.
Before Use Information about the water This iron works with ordinary tap water. Decalcified water of any kind or water from tumble-dryers is not suitable, since it may be very corrosive. Never use water treated with filter cartridges, since the residues (e.g. particles of activated carbon) may block the mechanical parts of the appliance. Never add in perfumes, oils, starch into the water. Water with additives may damage the steam generator leaving you with subsequent costs of cleaning and service.
No temperature regulation The iron has been designed to offer you the peace of mind of steam ironing any type of fabric. You no longer have to worry about adjusting the temperature and/or the steam or arranging the garments according to the fabric type.When ironing very delicate fabrics, it’s recommended to perform an ironing test on a hidden point of the garment or to cover the garment with a cloth.
Starting the Appliance DRY IRONING MADE IN ITALY • Put the iron on the iron-rest mat (20). • Turn the appliance on (power button 1). Simultaneously, the orange warming-up indicator light on the iron lights up (11). Later it switches off as soon as the soleplate reaches the required temperature.The iron reaches the required temperature after 3-5 minutes. • To dry iron DO NOT press the steam button. After dry ironing - Turn off the appliance (on/off switch 9). - Pull the plug out of the mains socket.
In synchro mode the suction/blowing function is activated when you press the steam button on the iron (10). • To activate the synchro mode set the selector switch on position “II” (7). B2S UP AIR DOWN CONTINUOUS MODE MODE SWITCH In continous mode the suction/blowing function is activated without interruption. • To activate the continuous mode set the selector switch on position “I” (8). Starting the Appliance SYNCHRO MODE Important! Do not rest the hot iron directly on the Ironing board.
Maintenance 5 MAINTENANCE BOILER CLEANING (recommended every 6 months) • Always disconnect the power supply cord and ensure that the equipment is completely cool and the boiler contains no water. • Disconnect the iron from the steam supply. • Slowly unscrew the safety cap and remove it. • Incline the board (1) and unscrew the boiler unit. We recommend you begin carefully from the lower screws, making sure that the boiler unit does not fall. • Using the bottle fill the boiler with 0.8 litres of water.
With continuous use, the cover which is fitted with a drawstring is subject to wear and should be replaced regularly. Due to the design of this ironing system which incorporates a heated ironing surface and to guarantee the correct performance of the product,we recommend that you use only Euroflex ironing board covers. Metalised heat reflective covers and covers with thick lining are not suitable for this ironing system and may cause overheating of the suction motor.
Distributed by: Echidna Sewing 56 Neumann Road CAPALABA QLD 4157 PH 07 33903600 Email: support@echidnasewing.com.au Imported by: Euroflex Australia Pty Ltd 79 Furniss Road DARCH WA 6065 AUSTRALIA TEL: 08 9302 2526 Email: admin@euroflex.com.au Website: www.euroflex.com.au Manufactured by: Plastecs SRL Via dei Colli, 59 31058 Susegana (TV) - ITALY Tel: +39 0438 453334 Email: info@plastecs.it Website: www.euroflex-appliances.com Cod. 6809989.
