Service manual

Disassembly
2 - 16 Removing the Bluetooth Module
2.Disassembly
Removing the Bluetooth Module
1. Turn off the computer, remove the battery (page 2 - 5), and the CPU/RAM bay cover (page 2 - 10).
2. The Bluetooth module will be visible at point on the mainboard.
3. Remove screw and turn the bluetooth module over.
4. Carefully disconnect the cable and separate the module from the connector .
5. Lift the Bluetooth module up and off the computer.
1
2
3 4
5
Figure 12
Bluetooth Removal
a. Remove the cover and
locate the Bluetooth
module.
b. Remove the screw.
c. Disconnect the cable
and seperate the con-
nector.
d. Lift the Bluetooth module
out.
a.
b.
3
4
1
2
c.
5
d.

5. Bluetooth Module
•1 Screw