Service manual

Disassembly
Removing the Wireless LAN Module 2 - 15
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery (page 2 - 5) and the CPU/RAM bay cover (page 2 - 10).
2. The Wireless LAN module will be visible at point on the mainboard.
3. Carefully disconnect cable , then remove the screw from the module socket.
4. The Wireless LAN module will pop-up.
5. Lift the Wireless LAN module
(Figure d) up and off the computer.
Figure 11
Wireless LAN Module
Removal
a. Remove the cover and Io-
cate the heat sink.
b. Disconnect the cable and
remove the screw.
c. The WLAN module will pop
up.
d. Remove the WLAN mod-
ule.
Note: Make sure you re-
connect the antenna ca-
ble to the “Main” socket
(Figure b).
1
2
3
4
1
2
c.
a.
4
3
b.
d.
4

4. WLAN Module
•1 Screw