Service manual

Disassembly
Removing the Processor 2 - 13
2.Disassembly
3. When the screws are loosened sufficiently, carefully lift up the heat sink (Figure c) off the computer.
4. Turn the release latch towards the unlock symbol , to release the CPU (Figure d).
5. Carefully (it may be hot) lift the CPU up out of the socket (Figure e).
6. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
4
5
6
Figure 9
Processor Removal
Sequence
c. Remove the heat sink.
d. Turn the release latch to
unlock the CPU.
e. Lift the CPU out of the
socket.
d.
7

Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
Unlock
Lock
5
5
c.
4
e.
6

4. Heat Sink
6. CPU