Service manual

Disassembly
Removing the Keyboard 2 - 19
2.Disassembly
8. W870CU: Remove the screw and press at point to unsnap the the hinge cover module.
9. Turn the computer over, open the Lid/LCD and lift the hinge cover module and disconnect the cables & .
10. Turn the computer over again, press at point to unsnap the LED cover module (you may need to use a small
screwdriver to do this).
11. Turn the computer over, open the Lid/LCD and carefully lift the LED cover module and disconnect the cable .
12. Remove screws - from the keyboard
13. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable (Figure 14d).
14. Disconnect the keyboard ribbon cable from the locking collar socket .
15. Remove the keyboard .
1
2
3
4
5
6
7
7
8
9
13
14
15
16
14
a.
f.
d.
1
4
6
7
9
8
b.
g.
16
15
e.
22 2
5
3
10 11 12 13
c.
14
14

3. Hinge Cover Mod-
ule
7. LED Cover Module
14. Keyboard
•6 Screws
Figure 15
Keyboard Removal
(cont’d.)
a. Remove the screw and
press at point 2 toun-
snap the hinge cover
module.
b. Lift the hinge cover mod-
ule and disconnect the
cables.
c. Press at point 6 to un-
snap the LED cover
module.
d. Lift the LED cover mod-
ule and disconnect the
cable.
e. Remove the screws.
f. Disconnect the cable
from the locking collar.
g. Remove the keyboard.