Service manual

Disassembly
2 - 18 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn off the computer, and remove the battery (page 2 - 5), component bay cover (page 2 - 10), and processor
(page 2 - 12).
2. W860CU: (see over for W870CU)
Press at point to unsnap the LED cover module (you may need to use a
small screwdriver to do this).
3. Turn the computer over, open the Lid/LCD and carefully lift the LED cover module and disconnect the cable .
4. Remove screws - from the keyboard.
5. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable (Figure 14d).
6. Disconnect the keyboard ribbon cable from the locking collar socket .
7. Remove the keyboard.
1
2
2
3
4
8
9
10
11
Figure 14
Keyboard Removal
a. Press at point 1 to un-
snap the LED cover
module.
b. Lift the LED cover mod-
ule and disconnect the
cable.
c. Remove the screws.
d. Disconnect the cable
from the locking collar.
e. Remove the keyboard.
a.
d.
c.
1
3
5
2
4
7
6
8
9
b.
e.
11
9
10

2. LED Cover Module
9. Keyboard
•5 Screws