Service manual

Disassembly

2 - 12 Removing and Installing the Processor

2.Disassembly

Removing and Installing the Processor

Processor Removal Procedure

1. Turn off the computer, remove the battery (page 2 - 5), and component bay cover (page 2 - 10).

2. Remove the CPU heat sink screws in the order

, , & (the reverse order as indicated on the label).

3. Carefully lift up the heat sink (Figure 8c) off the computer.

Figure 8

Processor

Removal

a. Remove the screws.

b. Remove the heat-

sink fan.

c. Remove the screws

in the order indicat-

ed.

d. Remove the heat

sink.



CPU Warning

In order to prevent

damaging the contact

pins when removing

the CPU, it is neces-

sary to first remove the

WLAN module from

the computer.



5. Heat Sink

•4 Screws

Note: Loosen the screws in the reverse order

4, 3, 2, 1 as indicated on the label.