Service manual

Disassembly
2 - 8 Removing the Hard Disk Drive
2.Disassembly
Removing the Hard Disk(s) in the Secondary HDD Bay (W870CU only)
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the component bay cover and remove screws - .
3. Carefully remove the cover .
4. Slide the hard disk assembly in the direction of the arrow .
5. Lift the hard disk assembly out of the compartment.
6. Remove the screws - to separate the hard disk from the brackets.
7. Reverse the process to install a new hard disk drive (do not forget to replace all screws and covers).

21. Hard Disk
•17 Screws
Figure 4
Secondary HDD
Assembly Removal
a. Remove the screws and
cover.
b. Slide the hard disk as-
sembly out off the com-
puter.
c. Remove the screws to
separate the hard disk
from the brackets.
1
11
12
13
14
15
20
21
1
2
Model B
5
2
1
4
6
7
8
9
3
1011
a. c.
12
b.
W870CU
13
20
19
16
15
17
18
21