Specifications

1 - 4 Introduction
Quick Start Guide
1
Attaching the Optional Hand Holder.
The hand holder offers ease of use when using the computer on the move outdoors. Attach the hand holder as
follows:
1. Place the hand holder at the rear of the computer with the screws facing inwards towards the computer.
2. Align the screws on the hand holder with the screw holes
- in the rear of the case (you may need to
adjust the straps to do this).
3. Fully tighten the screws
- using a flathead screwdriver.
4. Put your hand through the hand holder and secure it with the velcro straps & .
Figure 1 - 3 - Attaching the Optional Hand Holder
1 4
5 8
9 10
3
4
2
5
1
6
7
8
9
10