Specifications

Modules
PC Camera Module 6 - 11
6
PC Camera Module
Before installing the PC Camera module driver use the On-Screen Menu button
to power ON (the default setting is OFF) the PC Camera module (see “On-
Screen Menu” on page 1 - 18
). Make sure you install the drivers in the order indicated
in
Table 4 - 1, on page 4 - 3 .
PC Camera Driver Installation
1. Insert the Device Drivers & Utilities + User’s Manual disc into your exter-
nal optical device drive.
2. Click 2.Install Camera Driver > Yes.
3. Choose the language you prefer and click Next > Next.
4. Click Finish to restart the computer.
5. Run the BisonCap application program from the BisonCam shortcut on the
desktop, or from the BisonCam item in the Start > Programs/All Pro-
grams menu (if the hardware is turned off use the on-screen menu to turn it
on again).

Camera Button
Press the Camera Button
to run the BisonCap ap-
plication program.
When the
BisonCap appli-
cation is running, press the
Camera Button to take
a still picture
(see also
“Taking Still Pictures” on
page 6 - 16
).
Note press the
Camera But-
ton
and release it after
you hear the camera shutter
sound. Note that holding the
camera button down will not
take multiple pictures, you
must press and release the
button to take pictures (after
the shutter sound is heard
you will be ready to take fur-
ther pictures).