Specifications

Modules & Options
7 - 56 3.75G/HSPA Module
7
HSPA Modem Interface
The connection information is stored on the USIM card supplied by the service pro-
vider.
1. Power on the 3.75G/HSPA modem module using the Fn + key combination.
2. Access the HSPA Modem interface from the Start menu (Start > Programs/All
Programs > HSPA Modem > HSPA Modem), or by double-clicking the desktop
icon .
3. If a USIM card is not installed then a message will appear to notify you of this (click
OK to close the message and install the USIM card).
4. If you are required to enter a pin # then a message will appear to prompt you to
enter a pin #. (Note: to change pin # go to Settings and click OK in PIN
code.)
5. Click the Network connection button and the HSPA Modem interface
window will display Connection Manager.

HSPA Modem Help
To get help on HSPA
modem configuration
and settings, click the
help icon and select
Help.
Figure 7 - 48
HSPA Modem
Interface Window

Connection Manager
The connection information is commonly stored on the USIM
card supplied by the service provider. However if your ser-
vice provider requires details such as IP Address , User-
name
and Password etc. to be entered before connection
you can enter them in the Connection Manager tab, or
save the details in Profiles .