Specifications

Advanced Controls
Conserving Power (System) 3 - 23
3
Configuring the Power Button
The power button may be set to send the computer in to either Standby or Hi-
bernate mode. In Standby mode, the LED will flash green. In Hibernate
mode the LED will be Off (battery powered)/Orange (AC Adapter powered).
In a power saving mode set to save power through individual components (e.g.
hard disk, monitor), the LED will remain green.

Lid Button
It is recommended that
you set the lid (left
LCD cover sensor)
power button to “Do
nothing”.
This will prevent acci-
dentally triggering a
power saving mode
when you rotate the
LCD swivel screen.
Figure 3 - 14
Power Options
(Advanced - Power
Buttons)
(Sleep) Button

Sleep Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the
menu illustrated in Figure 3 - 14. In Windows this is referred to as the Sleep button.
Power Button Sleep/ResumeLid